Fogger Pulsfog K22 20O Stationary thermal fogger large frame for oil based product application. This product designed to fog inflammable and non-flammable fogging solutions but not suspensions.
PRODUCT DESCRIPTION :
Thermal fogging is the generation of ultra-fine droplets in a range of 1-50 ?m using thermo-pneumatic energy. Liquid substances are vaporized in the unit and form ultra-fine aerosols by condensing on contact with cool ambient air. Thermal fogging is used for any pest control task where active substances should be uniformly distributed even in inaccessible places, without leaving undesirable residues.
The fogging technique is the solution for treating large areas and spaces with a minimum quantity of pesticide solution, less operational work and with little harm to the environment (less residues, no penetration into the ground), e.g. in the field of public health, stock protection, plant protection, disinfection, decontamination, deodorization and cinema effects.
Technical Data Fogger Pulsfog K22 20O:
- Empty weight : 46 kg
- Size (length x breadth x height) : 138 x 87 x 50 cm
- Capacity of solution tank : 80 litres (tolerance 1-2 litres) made of stainless steel
- Capacity of fuel tank : 20 litres
- Cubic capacity of engine : 1000 cm3
- Max. performance of engine : 37,4 kW (50,8 hp, 32.200 kcal/h)
- Max. fuel consumption : 3,8 l/h
- Automatic ignition : Electronic ignition coil fed by 4 x dry batteries = 6V
- Standard starting device : Manual start
- Flow rate : 10 – 75 l/h (according to nozzle size used)3)
- Standard flow rate : 40 l/h
- Droplet size spectrum (depending on oil viscosity and nozzle size used) :
< 25 μm (oil) / < 60 μm (oil/water) /
< 150 μm (water) - Optional :
Electrical starting device
Remote control including automatic cut-off device and manual start
Turntable