Fogging PulsFOG K22-10STD stationary thermal fogger/ small frame for water based product application, designed to fog water based, non – flammable fogging solutions and suspensions.
Thermal fogging is the generation of ultra-fine droplets in a range of 1-50 um using thermo-pneumatic energy. Liquid substances are vaporized in the unit and form ultra-fine aerosols by condensing on contact with cool ambient air.
BENEFITS :
- Used for any pest control task where active substances should be uniformly distributed even in inaccessible places, without leaving undesirable residues.
- Solution for treating large areas and spaces with a minimum quantity of pesticide solution, less operational work and with little harm to the environment (less residues, no penetration into the ground), e.g. in the field of public health, stock protection, plant protection, disinfection, decontamination, deodorization and cinema effects.
TECHNICAL SPECIFICATION FOGGING PULSFOG K22-10STD:
- Empty weight : 18 kg (without solution tank)
- Size (length x breadth x height) : 132 x 38 x 47 cm
- Capacity of solution tank : 55 litres (square version) made of polyethylene
- Capacity of fuel tank : 20 (optionally 10) litres
- Cubic capacity of engine : 1000 cm3
- Max. performance of engine : 37,4 kW (50,8 hp, 32.200 kcal/h)
- Max. fuel consumption : 3,8 l/h
- Automatic ignition : Electronic ignition coil fed by 4 x dry batteries = 6V
- Standard starting device : Manual start
- Flow rate : 10 – 75 l/h (according to nozzle size used)
- Standard flow rate : 40 l/h
- Droplet size spectrum (depending on oil viscosity and nozzle size used)
< 25 μm (oil) / < 60 μm (oil/water) /
< 150 μm (water) - Optional :
Electrical starting device
Remote control including automatic cut-off device and manual start
Turntable