Thermal Fogger Pulsfog K10STD


Thermal Fogger Pulsfog K10STD is the generation of ultra-fine droplets in a range of 1-50 μm using thermo-pneumatic energy. Liquid substances are vaporized in the unit and form ultra-fine aerosols by condensing on contact with cool ambient air. Thermal fogging is used for any pest control task where active substances should be uniformly distributed even in inaccessible places, without leaving undesirable residues.

Thermal Fogger Pulsfog K10STD

PRODUCT DESCRIPTION :

The fogging technique is the solution for treating large areas and spaces with a minimum quantity of pesticide solution, less operational work and with little harm to the environment (less residues, no penetration into the ground), e.g. in the field of public health, stock protection, plant protection, disinfection, decontamination, deodorization and cinema effects.

Technical Specification Thermal Fogger Pulsfog K10STD :

  • Empty weight : 8,5 kg
  • Size (length x breadth x height) : 129 x 29 x 36 cm
  • Capacity of solution tank : 9 litres
  • Capacity of fuel tank : 2 litres
  • Cubic capacity of engine : 300 cm³
  • Max. performance of engine : 17,5 kW (24,1 hp, 15.300 kcal/h)
  • Max. fuel consumption : 1,9 l/h
  • Automatic ignition : Electronic ignition coil fed by 4 x dry batteries = 6V
  • Starting device : Manual start
  • Flow rate : 10 – 35 l/h (according to nozzle size used)
  • Standard flow rate : 12 l/h
  • Droplet size spectrum (depending on oil viscosity and nozzle size used) :
    < 25 μm (oil)
    < 60 μm (oil/water)
    < 150 μm (water)

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

CONTACT US

Jl. Hayam Wuruk Gedung Harco Glodok Lantai 5 Blok A. 42

Telp :

021-22687001

WA : 081319805915 | 0812 9030 9065

Email :

madirimultikreasi@gmail.com ǀ ptsriayumultikreasi@gmail.com ǀ marketing@ptsriayumultikreasi.com

LOCATION