Chain Saws MS193 C STIHL

 Chain Saws MS193 C STIHL

Chain Saws MS193 C STIHL is a light weight, fantastically balanced rear handle chainsaw. Designed with more comfort features

Specification Chain Saws MS193 C STIHL :

Engine : 2-cycle

Cylinder displacement : 30.1 cc

Power output : 1.3 kW (1.8 bhp)

Igntion Sytem : Electronic

Chain Oil Capacity : 0.22 L

Fuel Tank Capacity : 0.27 LFuel : Petrol mixed with 2-cycle engine oil

Fuel Mix Ratio : 1 L STIHL

Engine ol : 50 L Petrol

Engine weight without gide bar and saw chain : 3.5 kg

Bar Length : 10″ (25 cm), 12″ (30 cm)

Maximum engine speed with guide bar and saw chain : 13.500 rpm

Standard equipment



EFFORTLESS STARTING.  Chain Saws MS193 C STIHL STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.



HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.


FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.



FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.



REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.



FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.


PROTECTION AGAINST LOSS The nuts are attached to the sprocket cover in a captive manner. Chain Saws MS193 C STIHL This makes it impossible for the nuts to fall off and get lost when the cover is removed.

Tool free fuel caps

Special caps to open and close the tank cap quickly, easily and without tools.

Chain Saws MS193 C STIHL

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *


Jl. Hayam Wuruk Gedung Harco Glodok Lantai 5 Blok A. 42

Telp :


WA : 081319805915 | 0812 9030 9065

Email : ǀ ǀ