Cold Fogger Haaise Chief 700
Cold Fogger Haaise Chief 700 designed with the domestic and commercial user in mind. This Portable and compact fogger is preset to the ideal output rate for desinfecting and pest control.
The Chief 700 is patended and unique in terms of Care, Service and Maintenance :
1. Minimal service tools are required (1 x Wrench, 1 x Screwdriver) to dis-assemble and re-assemble the entire machine-all parts
2. It is Field Strippable-pretty much BY HAND-of major components including All Electrical Replacement requirements. The Chief-700 can be dis-assemble and re-assembled by HAND.
Specification Cold Fogger Haaise Chief 700 :
| MOTOR/BLOWER SAMSUNG |
VAC/Hz AMPS WATTS RPM |
230-240 Volt/ 50/60 Hz 5.6 700 Watts 37,000 +/- 1500 |
| AIR VOLUME-OUTPUT | 2910 lts/minute | |
| VACUUM | 24.0 kPa | |
| FORMULATION TANK | Capacity in litres with Graduated markings | 4 lt STD. (5 lt, 6lt with 9lt Optional) |
| FLOW RATE VALVE | Adjustale/Variable Output Maximum Flow Rate |
Needle Valve, Brass, SSTL (Optional) 60 lts/Hr |
| SET FLOW RATE VALVES | FSFR Valves, BRASS, SSTL Optional | Set of 5 : #20 = 5 lts/Hr, #28 = 10 lts/Hr, #37 = 16 lts/Hr, #42 = 21 lts/Hr, #47 = 26 lts/Hr |
| DROPLET RANGE | Visible*metres | 15-20 metres |
| APRTICLE SIZE DIAMETER | Measured in microns (μm) | 5-50 μm |
| NOZZLE | Vortical in that the spray swirls on exit DIFUSER-Material Face Plate Replaceable Air Bleed |
NOVA-MIST Vortical Adjustable Nozzle HDPE Yes Yes |
| Material-Construction | Motor Housing/Nozzle Formulation Tank Protective Tank “Boot” Fittings Eternal Delivery Lines Internal Delivery Lines-Housing and Tank “O” Ring Material/in-Tank Filter |
HDPE HDPE Rubber Brass, SSTL-Optional Nylon Brass, SSTL-Optional VITON |
| Multi-Purpose Use | Application of Insecticides, Fungicides, Foliar, Fertilizers, Disinfectants, Sanitizers | |
| Tank Opening Ports | YES-Each comply with W-H.O Guideliness | >90mm diameter |
| Formulation Filter | In-Tank Push on Filter | SSTL Mesh with VITON Support |
| Warranty | Conditional | 24 months |
| Shipping Dims | 36.0 cm x 36.0 m x 52.0 cm | |
| Volume(Packed) | Cubic Metres | 0.07 m³ |
| Weight (kgs) | 5.5 kgs | |
| ADDITIONAL FEATURES | ||
| Screw Cap. Assembly | No screws-plastic to plastic Motor is secured in Housing with a Screw Cap, Nozzle is secured by a Screw Cap, Formulation Tank+Housing Secured with a Screw Cap | |
| Insternal Sound Dampner | Noise Suppressor Capacitor | |
| Heat Sink-Heat Shield | Within Motor Housing | |
| Thermal Cut Out | For Motor Protection | |
| TORQUE CONTROL | Motor Torque Control to counter the motor wanting to spin inside of the Housing-Completely elimination electric wiring twist | |
| 2 Part Wiring | To allow easy removal of motor rom the attached wiring for maintenance purpose |
